PD 400 Lathe Accessories

Proxxon Logo
Proxxon PD 400 Lathe Accessories


4 Jaw Self-Centring Chuck The four jaws are self-centring. High accuracy 100mm chuck Buy Now or Check Price		4 Jaw Independent Chuck Used to mount irregularly & asymmetrically shaped objects. Each jaw is adjusted individually and centring is thus achieved manually. Hardened reversible jaws. Chuck diameter 100mm Buy Now or Check Price

Faceplate & Clamps This accessory is used in place of the standard chuck and mounts largers and asymmetrical workpieces. Diameter of 150mm, with 2 throught T-slots, as well as mounting clamps Buy Now or Check Price		Splash Guard and Chip Collecting Tray Made from 1.25mm steel plate, powder coated. Cooling fluid and chips are collected by the tray. A welded cover protects the lathe motor. Slopes on the front and rear of the tray make it easy to clean. Mounting holes and raised base to secure the PD 400 are pre-drilled. Seeping through of coolant is impossible. Size:800mm long, 270mm wide and 290mm high. Buy Now or Check Price

Quick-Change Tool Post Including two holders. Provides quick tool changes with easy height adjustment. Buy Now or Check Price		Individual Quick Change Holder Fits the tool post of PD 400 Buy Now or Check Price

PF 400 Mill/Drill Head This unit is fitted to the lathe PD 400 which is supplied with a milled area for fixing this accessory. Identicle to the FF 400, but excludes the cross table. In its place, a slotted table of 150x110mm is supplied, with 3 T nuts. The table is fitted to the cross slide with 2 bolts. The cross slide thus replaces the cross table. Technical Data: 220-240v. 140W 50-60 Hz. Spindle rev 280-550-870-1,200-1,500 and 2,200rpm		Collet Set for Accurate Use on Round Components One of each collet: 2.0, 3.0, 4.0, 5.0, 6.0, 8.0, 10 and 12mm are included. Concentric accuracy better than 0.2mm, much better than a chuck. One soft collet for making a custom size yourself. The included collet attachment is mounted in the place of the headstock chuck. Buy Now or Check Price

Travelling Steady Fitted to the carriage of the lathe. Indispensable when turning long slender pieces. For maximun diater 50mm.		Fixed Steady Used when turning long, slender work. Fitted directly to the bed and used when the tail stock support is inadequate. Maximum diameter is 50mm.

Gear Tooth Chuck & Adapter Industrial quality, however not as accurate as the collets. With 10mm adapter which fits into 10mm collet. Includes the chuck key.		Centre Turning Accessory Ideal when turning with highest possible accuracy. Supplied with 2 dead centres (2MT &3MT), drive/face plate with 30mm bore and 3 clamp screws, as well as reducing brushes 30/20mm and 30/15mm. A threaded drive pin rides in the slot.

5 Piece Lathe Tool Set One each of roughing, parting, finishing, left and right cutter. 10 x 10 x 85mm		3 Piece Tooling Set with Disposable TC Tips Three holders: for roughing, for boringin holes 12mm or more, for longitudinal turning (both 10 x 10 x 70mm). Three tungsten inserts 55 degrees are included, as well as fixing screw and TX 8 spanner. Supplied in a wooden box with lid.

3 Piece Thread Cutting Set External thread, internal thread (ground to 60 degrees, metric), one general cutting. Supplied in wooden box. 10 x 10 x 85mm		Parting Tool Holder & Tool Used in PD 400 quick change system. Used to part stock and cut slots. Supplied with 12 x 3 x 85mm HSS cobalt parting tool. (Also replacement tools: 476899)

Proxxon 6 Piece HSS Boring Tool Set This six piece set is supplied in a wooden box. It comprises one of eacg cutter for 60 degree (metric threads) and 55 degree (Whitworth threads), for cutting internal threads, 1.3mm, 2.65mm and 4 mm boring bars and a tool holder. The shank diameter is 6mm and length 95mm. These cutters are held in a tool holder that mounts to the tool post of either the PD 230/E or PD 400 lathe.		Tool Holder for Rotary Tools For use on lathe machines. Made of steel 30 x 10 x 65mm. This holder allows mounting of the rotary tool LB/E or IB/E to the tool post of the PD230/E and PD 400 lathes for grinding or polishing. Collar size 20mm. Shaft 8x 10mm for tool ho

Die Holder for PD 230/E and PD 400 The plain shaft fits the 10mm diameter holder mounted in the tailstock of either the PD 230/E or PD 400 lathes. The holder is held by hand while cutting threads. For cutting male threads, supplied with six metric dies: M3, M4, M5, M6, M8 and M10. Supplied in a wooden box.		3 Piece Tooling Set with Tungsten Inserts Three Holders: Roughing out (8 x 8 x 70mm)Boring bar (8 x 8 x 90mm, holes from 12mm). Longitudinal work (8 x 8 x 70mm). Standard tungsten inserts, 55 degrees, plated. Three additional inserts securing screw and ket TX8 are included. SUpplied in a wooden box with sliding lid.

Micromat Step Clamp Set Made of steel. For safe fixing of small workpieces (up to 18mm thick) to the Micro miller MF 70. Also fits the mill/lathe system PD230/E and PD 400. Complete with 2 each stepped blocks and clamps, T slot nuts of the Micromot standard (11.5 x 11 x 4mm), bolts. Supplied in a wooden box with sliding lid.