 |
Universal Carbide Tipped Tool Set
6-pieces
with carbide tips
high cutting speeds and short production times
the long service life of carbide metal reduces tool replacement
all turning chisels have precision-ground cutting edges and flanks. Buy Now or Check Price
|
|
Cross Section 10x10mm Order No: 10910
|
 |
Universal Carbide Tipped Tool Set
10-pieces
with carbide tips
high cutting speeds and short production times
the long service life of carbide metal reduces tool replacement time
all paring chisels have precision-ground cutting edges and flanks. Buy Now or Check Price
|
Cross Section 8x8 Order No: 10911
Cross Section 10x10mm Order No 10912
Cross Section 12x12mm Order N0: 10913 |
 |
Parting Off Tool
With carbide tip
|
|
Cross Section 8x8mm Order No: 109111
Cross Section 10x10mm Order No: 109101
|
 |
Inside Turning Tool
With carbide tip
|
|
Cross Section 8x8mm Order No: 109112
Cross Section 10x10mm Order No: 109102
|
 |
Offset Turning Tool 90°
With carbide tip
|
|
Cross Section 8x8mm Order No: 109113
Cross Section 10x10mm Order No: 109103
|
 |
Curved Turning Tool 45°
With carbide tip
|
|
Cross Section 8x8mm Order No: 109114
Cross Section 10x10mm Order No: 109104
|
 |
Outside Thread Turning Tool 60°
With carbide tip
|
|
Cross Section 10x10mm Order No: 109105
|
 |
Face Turning Tool
with carbide tip
|
|
Cross Section 8x8 mm Order-No. 109117
|
 |
HSS Tipped tool set
8-pieces
all turning chisels have precision-ground cutting edges and flanks
1 x left hand turning tool
1 x right hand turning tool
1 x outside thread turning tool 60° - 55°
1 x groove turning tool
1 x curved rough turning tool
1 x drill turning chisel
1 x thread cutting chisel 60° - 55°
1x inside thread turning tool 60° - 55°
|
|
Cross Section 4x4mm Order No: 10915 - Price
Cross Section 8x8mm Order No: 10916 - Price
Cross Section 10x10mm Order No: 10917 - Price
|
 |
Clamping holder set for indexable inserts
6-pieces with key
each tool with indexable insert
compatible indexable inserts for replacement see No. 10865
1 x left hand turning tool
1 x right hand roughing tool
1 x pointed turning tool
1 x right hand turning tool
1 x right hand face turning tool
1 x boring bar
|
|
Cross Section 8x8mm Order No: 10860 - Price
Cross Section 10x10mm Order No: 10861 - Price
|
 |
Left hand turning tool
with indexable insert
compatible indexable inserts for replacement see No. 10865
|
|
Cross Section 8x8mm Order No: 108601
Cross Section 10x10mm Order No: 108611
|
 |
Right hand turning tool
with indexable insert compatible indexable inserts for replacement see No. 10865
|
|
Cross Section 8x8mm Order No: 108602
Cross Section 10x10mm Order No: 108612
|
 |
Right hand roughing tool
with indexable inserts compatible indexable inserts for replacement see No. 10865
|
|
Cross Section 8x8mm Order No: 108603
Cross Section 10x10mm Order No: 108613
|
 |
Right hand face turning tool
with indexable insert compatible indexable inserts for replacement see No. 10865 |
|
Cross Section 8x8mm Order No 108604
Cross Section 10x10mm Order No: 108614
|
 |
Pointed turning tool
with indexable insert compatible indexable inserts for replacement see No. 10865
|
|
cross section 8 x 8 mm Order-No. 108605
cross section 10 x 10 mm Order-No. 108615
|
 |
Boring bar
with indexable insert compatible indexable inserts for replacement see No. 10865. right hand cutting for inside turning
|
diam 8 mm Order-No. 108606
diam 10 mm Order-No. 10861 |
 |
Carbide tipped indexable inserts set
consisting of 5 replacement plates, carbide quality, 4 cutting edges
|
|
pack. unit: 5 pieces Order No. 10865 - Price
|
 |
Parting tool holder incl. blade
blade 1,5 mm
|
cross section 8 x 8 mm Order No. 10837 - Price
cross section 10 x 10 mm Order No. 10835 - Price
replacement blade Order No. 10836 -Price
|
 |
Punching Set
8-pieces -diam 1,6 – 2,4 – 3,2 – 4,6 – 4,8 – 5,6 – 6,4 – 8,0
total length 100 mm
20 mm mandril length
Order No. 13290 - Price
|
 |
Magnetic pick-up tool
telescopes to 630 mm
magnet diam 11 mm
Order No. 13980
|
 |
Knurling tool
cross section 12 x 12 mm
self-centering
with 2 knurling wheels
knurling wheels: width 9,5 mm, knurling wheel Æ 19 mm
Application: For clamping in lathes. Used to contour spindles, screws, nuts etc. Order No. 10920
replacement wheel Order No. 10922
|
 |
Knurling pliers
cross section 10 x 10 mm
self-centering
with 2 knurling wheels
knurling wheels: width 9,5 mm, knurling wheel Æ 19 mm
Application: for clamping in lathes. Used to contour spindles, screws, nuts etc. The working pressure is set on the tool in order to avoid too much pressure on the machine.
Order No. 10921
replacement wheel Order No. 10922
|
Example of use |
Universal high performance inserted tooth milling cutter
Industrial quality 4 cutters
outer dia 40 mm
location hole dia 16 mm
with clamping screw and screw driver
suitable to multi-purpose shell end milling mandril No. 11729
very good swarf removal rate due to positive cutting insert location
Order No. 11875 Buy Now or Check Price
|
| |
Carbide indexable inserts for inserted tooth milling cutter
pack. unit: 10 pieces Buy Now or Check Price Order No. 11876
|
 |
Countersink and burr remover 90° HSS
5-pieces
with cross hole
with straight shank
Application: for trimming and countersinking bores. Due to the special cutting angle, the swarf is easily shelled. The swarf is led safely through the slanted hole, and any damage to the work piece can be avoided.
|
|
Sinker diam mm
|
6 |
10 |
14 |
21 |
28 |
Order No: |
| Shank diam |
6 |
6 |
8 |
10 |
12 |
11990 |
| For bores |
1-4 |
2-5 |
5-10 |
10-15 |
15-20 |
|
 |
Spot facer set HSS
7-pieces
with straight shank
with solid pilot
Application: for through holes, for the countersinking of cheese heads screws
|
| for screws |
M3 |
M4 |
M5 |
M6 |
M8 |
M10 |
M12 |
Order No: |
|
shank diam mm
|
6 |
6 |
6 |
8 |
10 |
12 |
12 |
11991 |
|
dowel pin diam
|
3.2 |
4.2 |
5.2 |
6.2 |
8.2 |
10.2 |
12.2 |
|
 |
Set of general purpose slotting drills and end mills.
Solid carbide
5-pieces
with straight shank
2 cutters
helically fluted
very high endurance
1 bit cuts to the middle on the front face, therefore suitable for drilling following lateral displacement
Check Price or Buy Now
|
| Cutter diam mm |
4 |
5 |
6 |
8 |
10 |
Order No: |
| Shank diam mm |
4 |
5 |
6 |
8 |
10 |
11826 |
|
 |
“TITAN“coated set of slotting end mills
11-pieces
short with straight shank
2 cutters
straight fluted
1 bit cuts to the middle on the front face, therefore suitable for drilling and then lateral displacement
Application: for drilling and milling e.g. of feather key grooves
|
| Cutter diam mm |
2 |
3 |
4 |
5 |
6 |
8 |
10 |
12 |
14 |
16 |
18 |
Order No: |
| Shank diam mm |
6 |
6 |
6 |
6 |
6 |
10 |
10 |
12 |
12 |
16 |
16 |
11825 |
|
|
|
Set of general purpose shell end mills
Solid carbide
5-pieces
with straight shank
4 cutters
helically fluted
very high endurance
Application: for deep grooves and contour milling, not suitable for drilling
|
| Cutter diam mm |
4 |
5 |
6 |
8 |
10 |
Order No: |
| Shank diam mm |
4 |
5 |
6 |
8 |
10 |
11869 |
|
 |
“TITAN” coated set of shell end mills
9-pieces
short with straight shank
4 cutters
helically fluted
Application: for deep grooves and contour milling, not suitable for drilling
Check Price or Buy Now
|
|
Cutter diam mm
|
4 |
5 |
6 |
8 |
10 |
12 |
14 |
16 |
18 |
Order No: |
| Shank diam mm |
6 |
6 |
6 |
10 |
10 |
12 |
12 |
16 |
16 |
11843 |
|
 |
“TITAN” coated set of shell end mills
industrial quality 12-pieces
6 slotting end mills - 2 cutters
6 shell end mills - 4 cutters
helically fluted
1 bit cuts to the middle on the front face, therefore also suitable for drilling following lateral displacement (slotting end mills)
in a wooden case
for a better work piece surface
high tool endurance, double cutting efficiency
substantially less wear in comparison with HSS mills
Buy Now or Check Price
|
| Cutter diam mm 2 cutter |
3 |
4 |
6 |
8 |
10 |
12 |
Order No: |
| Cutter diam mm 4 cutter |
3 |
4 |
6 |
8 |
10 |
12 |
11873 |
| Shank diam mm |
6 |
6 |
6 |
10 |
10 |
12 |
|
 |
“TITAN” coated set of shell end mills
industrial quality 20-pieces
10 slotting end mills - 2 cutters
10 shell end mills - 4 cutters
helically fluted
1 bit cuts to the middle on the front face, therefore also suitable for drilling following lateral displacement (slotting end mills)
in a wooden case
for a better work piece surface high
tool endurance, double cutting efficiency
substantially less wear in comparison with HSS mills
Buy Now or Check Price
|
| Cutter diam mm 2 cutters |
3 |
4 |
5 |
6 |
8 |
10 |
12 |
14 |
18 |
20 |
Order No:
|
| Cutter diam mm 4 cutters |
3 |
4 |
5 |
6 |
8 |
10 |
12 |
14 |
18 |
20 |
11870 |
| Shank diam mm |
6 |
6 |
6 |
6 |
10 |
10 |
12 |
12 |
16 |
16 |
|
|
|
Radius cutter set HSS
5-pieces
with straight shank
4 cutters
1 bit cuts to the middle on the front face, therefore also suitable for drilling following lateral displacement
Application: for the milling of semi-circular grooves, rounding off of edges, contour milling
|
| Cutter diam mm |
4 |
5 |
6 |
8 |
10 |
Order No: |
| Shank diam mm |
4 |
5 |
6 |
8 |
10 |
11885 |
| Radius mm |
2.0 |
2.5 |
3 |
4 |
5 |
|
|
|
Slot cutter set HSS
9-pieces
with straight shank
cross toothed
cutting on the perimeter
Application: for milling curved washer grooves or for milling small slits and grooves.
Buy Now or Check Price
|
| Diam mm |
10.5 |
10.5 |
19.5 |
19.5 |
19.5 |
22.5 |
25.5 |
28.5 |
32.5 |
Order No: |
| Cutter width mm |
2 |
3 |
4 |
5 |
6 |
5 |
6 |
8 |
10 |
11888 |
| Shank diam mm |
12 |
12 |
12 |
12 |
12 |
12 |
12 |
12 |
12 |
|
 |
Angular milling cutter set HSS (Dove Tail)
5-pieces
with straight shank
cutting on the perimeter and on the front
straight toothed
Application: for the milling of small dovetail guides, for breaking edges
|
| Dia mm |
13 |
16 |
20 |
25 |
32 |
Order No: |
| Shank diam mm |
12 |
12 |
12 |
12 |
16 |
11887 |
| Angle of mill |
60 |
60 |
60 |
60 |
60 |
|
 |
Single-corner rounding cutter set HSS
8-pieces
with straight shank
right hand cut
straight toothed
Application: for the milling of round outer edges and guides
Buy Now or Check Price
|
| Radius mm |
1 |
2 |
3 |
4 |
5 |
6 |
8 |
10 |
Order No: |
| Shank diam mm |
10 |
10 |
12 |
12 |
12 |
16 |
16 |
16 |
11889 |
|
 |
Hard metal milling cutter with diamond point
14-pieces
with straight shank
Application: suitable for boring and milling with high revolution
Buy Now or Check Price
|
| Diam mm |
0.7 |
0.8 |
0.9 |
1.0 |
1.1 |
1.2 |
1.3 |
1.4 |
1.5 |
1.6 |
1.7 |
1.8 |
1.9 |
2.0 |
Order No: |
| Shank diam mm |
3 |
3 |
3 |
3 |
3 |
3 |
3 |
3 |
3 |
3 |
3 |
3 |
3 |
3 |
11890 |
|
 |
Shell type single angle milling cutters
with longitudinal groove
cutting on the perimeter
for clamping on shell end milling mandril No. 11729 Application: milling e.g. angular guides (dovetail)
| Diam mm |
Bore mm |
Angle of mill |
Order No: |
| 63 |
16 |
45 |
11910 |
| 63 |
16 |
60 |
11911 |
|
 |
Face milling cutters HSS
finishing cutter with smooth toothed wheels
cuts on the perimeter and on the front
fine toothed with longitudinal and transverse groove
for clamping on shell end milling mandril No. 11729
Application: for roughing corners and end faces
| Diam mm |
Width mm |
Bore mm |
Order No: |
| 40 |
20 |
16 |
11920 |
| 35 |
35 |
16 |
11921 |
| 40 |
40 |
16 |
11922 |
|
 |
Face milling cutters HSS
roughing cutter with roughing toothwork
cuts on the perimeter and on the front
roughing and knurling toothed characteristics relief ground
with longitudinal and transverse groove
for clamping on shell end milling mandril No. 11729
Application: for roughing corners and end faces
| Diam mm |
Width mm |
Bore mm |
Order No: |
| 40 |
40 |
16 |
11925 |
|
 |
Side Milling Cutter
cuts on three sides
cross toothed
with longitudinal groove
for clamping on shell end milling mandril No. 11729
Application: for extremely long grooves
|
| Diam mm |
Width mm |
Bore mm |
Order No: |
| 50 |
4 |
16 |
11930 |
| 50 |
5 |
16 |
11931 |
| 50 |
6 |
16 |
11932 |
| 50 |
8 |
16 |
11933 |
| 50 |
10 |
16 |
11934 |
|
 |
Metal Slitting Saws HSS
- with lateral free grinding
- fine toothed
for clamping on shell end milling mandril No. 11729
Application: for cutting into lengths and slitting work pieces
|
Outer dia mm
|
Width mm |
Bore mm |
Order No. |
| 63 |
1 |
16 |
11951 |
| 63 |
2 |
16 |
11952 |
|
 |
Tooth form cutters HSS
with longitudinal groove
for clamping on shell end milling mandril No. 11729
A set of 8 cutters per module
Application: milling of toothed wheels
|
Module
|
Diameter Æ
|
Bore mm |
Order No |
| 0.5 |
50 |
16 |
11940 |
| 0.7 |
50 |
16 |
11941 |
| 0.75 |
50 |
16 |
11942 |
| 1 |
50 |
16 |
11943 |
| 1.25 |
50 |
16 |
11944 |
|
 |
“TITAN” coated step drill set
5-pieces
with straight shank
with 2 cutters
with centre drill tip
Application: the boring of the thinnest sheet steel without pre-boring, boring without burr and deforming the sheet, bores and removes burr at the same time with the next drill step.
| steps Æ mm |
4-12 |
4-20 |
5-28 |
4-30 |
4-39 |
Order No |
|
shank Æ mm
|
6 |
8 |
10 |
10 |
12 |
11880 |
|
 |
Miniature thread cutting set M1 – M2,5
30-pieces in plastic box
9 round dies M1 – M1,1 – M1,2 – M1,4 – M1,6 – M1,8 – M2 – M2,2 – M2,5
18 taps M1 – M2,5
1 die stock
2 holders for clamping the hand tap
Order No. 35430
|
 |
Tap and Die Set HSS
31-pieces in plastic box
industrial quality
DIN model
dies HSS M3-4-5-6-8-10-12
hand taps HSS M3-4-5-6-8-10-12
(3-pieces per set consisting of taper tap, second tap and third tap)
1 die stock Æ 25 mm
1 adjustable tap wrench size 1½
1 screw driver
Order No. 35411
|
 |
Professional tap and die set HSS
44-pieces in plastic box
industrial quality
DIN model
dies HSS M3-4-5-6-8-10-12
hand taps HSS M3-4-5-6-8-10-12
(3-pieces per set consisting of taper tap, second tap and third tap)
die stocks 20x5, 20x7, 25x9, 30x11, 38x14 mmadjustable tap wrenches sizes 1 and 2
twist drills for core removing holes HSS Æ 2.5 - 3.3 - 4.2 - 5.0 - 6.8 - 8.5 - 10.2 mm
thread gauge 24 blades
1 screw driver
Order No. 35501
|