  |
Precision Marking and Altimeter Device (11325)
Measuring Height 300 mm
Stainless and Hardened
with 2 Fine Locking Screws
Precise Adjustment Using Micrometer Screw
Polished Guides
Adjustable carbide tip
Digital Version (11326)
Reading Accurancy ± 0,01 mm
Reset Button
Reversible Metric/Inch
Large LCD Display
Application: to provide different types of work pieces with markings for bores and grooves.
Order No 11325 Buy Now or Check Price
Order No: 11326 Buy Now or Check Price
|
 |
Precision Measuring Tool Kit
in plastic box, 5-pieces
1 caliper made of stainless steel 150 mm, 0,05 mm reading accuracy
1 micrometer 0-25 mm, 0,01 mm reading accuracy, measuring surfaces made of carbide and adjustment wrench
1 absolutely accurate square 100 mm arm length
1 ruler 150 mm
Order No. 11312
|
 |
Precision Slide Caliper
Stainless, hardened and ground.
With a locking screw and depth gauge.
0,02 mm reading accuracy
100 mm Order-No. 11314 Buy Now or Check Price
150mm Order-No. 11322 Buy Now or Check Price
|
 |
Precision Dial Slide Caliper
150 mm
Stainless, hardened and ground
With a locking screw and depth gage
0,02 mm reading accuracy
Order No. 11319 Buy Now or Check Price
|
 |
Precision Electronic Digital Slide Caliper
Stainless, hardened and ground
with a locking screw and depth gauge
0,01 mm reading accuracy
5-digit LCD display with large display
Reversible metric/inch
0 – 100 mm Order-No. 11328 Buy Now or Check Price
0 – 150 mm Order-No. 11320 Buy Now or Check Price
0 – 200 mm Order-No. 11321 Buy Now or Check Price
|
 |
Precision Electronic Digital Slide Caliper
0 – 150 mm
According IP 65 – water and oil resistant
Stainless, hardened and ground
with a locking screw and depth gage
0,01 mm reading accuracy
5-digit LCD display with large display
reversible metric/inch
Order-No. 11318 Buy Now or Check Price
|
 |
Universal Graphometer
300 mm rail length
Stainless, hardened and ground.
With additional angle
Easy read off 4x90°.
Measuring scale 360°
Readout 5 min
45° and 60° chamfered, reversible and slideable
clamp for the adjustment of rail and angle
Order No. 11310 Buy Now or Check Price
|
 |
Straight Edge
200 mm
Cross section 28 x 7 mm
stainless
Hair measuring edge hardened and ground
With isolation protection
Order No. 11311 Buy Now or Check Price
|
 |
Precision Micrometer Screw
0 - 25 mm
Stainless, hardened, ground and lapped measurement surfaces
With a locking lever and ratchet
Reading accuracy 0,01 mm
In accordance with DIN 863
With carbide measurement surfaces
Isolating protection
Scales matt-chromium finished
Order No. 11301 Buy Now or Check Price
|
 |
Precision Micrometer Set
4-pieces
0 - 25 mm
25 - 50 mm
50 - 75 mm
75 - 100 mm
Stainless, hardened, ground and lapped measurement surfaces.
With a locking lever and ratchet.
Reading accuracy 0,01 mm.
In accordance with DIN 863.
With carbide measurement surfaces.
Isolating protection.
Scales matt-chromium finished.
With ground and lapped check gauge.Supplied in a wooden box.
Order No. 11317 Buy Now or Check Price
|
 |
Digital Precision Micrometer Screws
Stainless, hardened, ground and lapped measurement surfaces.
With a locking lever and ratchet.
Reading accuracy 0,01 mm.
In accordance with DIN 863.
With carbide measurement surfaces.
Isolating protection.
With ground and lapped check gages from 25 mm
Large LCD display.
Multifunctional display.
Reversible metric/inch.
0 – 25 mm Order No. 11392 Buy Now or Check Price
25-50 mm Order No. 11393 Buy Now or Check Price
|
  |
Holder for Micrometer Screws
Suitable for micrometer screws 0 – 100 mm
(Example of use, micrometer not included)
Order No. 11304 Buy Now or Check Price
|
 |
Square
Stainless, hardened and ground.
Wedge-shaped knife edges on the length side.
100 x 70 mm Order No. 13140 Buy Now or Check Price
150 x 100 mm Order No. 13141 Buy Now or Check Price
|
 |
Try Square Set
4-pieces
70x50 mm, 95x60 mm, 120x80 mm, 175x100 mm
hardened and ground
Order No. 13130 Buy Now or Check Price
|
 |
Precision Depth Measuring Caliper Gauge
200 mm
Stainless, hardened and ground.
With a locking screw.
Reading accuracy 0,05 mm.
Layer 100 mm.
Order No. 11323 Buy Now or Check Price
|
 |
Precision Digital Depth Measuring Caliper Gauge
150 mm
Stainless, hardened and ground.
With a locking screw.
Reading accuracy 0,01 mm.
Rest 100 mm.
5-digit LCD display with large display
reversible metric/inch.
Order No. 11327 Buy Now or Check Price
|
 |
Precision Micrometer Depth Gauge
0 - 100 mm
Stainless, hardened and ground.
With a locking screw and ratchet.
Reading accuracy 0,01 mm.
Supporting surface lapped.
4 replaceable insets dia 3 mm - 25 - 50 - 75 - 100 mm
|
 |
Telescope Gauge Set
6-piece
measurement range:
8-12,7 - 12,7-19 - 19-32 - 32-54 - 54-90 - 90-150 mm
stainless, hardened and ground
made of steel
Application: for internal measurements such as, e.g. bores and bearing seats. The two measurement sensors are expanded by pressure springs; clamping of measurement position is done by tightening knurled nut. The inner measurement of the bore is taken. The actual measurement is taken at both ends of the telescope gage by the micrometer screw.
Order No. 11315 Buy Now or Check Price
|
|
|
Precision Internal Micrometer Gauge Set
50 - 600 mm
Micrometer gauge 50 - 63 mm
With 6 extensions 13 - 25 - 50 - 100 - 150 - 200 mm
Stainless, hardened and ground
With a locking screw
Reading accuracy 0,01 mm
Control gauge 50 mm
Steel, matt-chromium
Application: for internal measurement such as, e.g. bores and bearing seats.
Order No. 11316 Buy Now or Check Price
|
|
|
Precision Two Position Internal Micrometer Gauges
Stainless, hardened and ground
With a locking screw and ratchet
Readout 0,01 mm
Scales matt-chromium
Measuring spindle 0,5 mm upwards
Carbide-tipped measuring surfaces
measurement range 5-30 mm Order No. 13115
measurement range 25-50 mm Order No. 13116
measurement range 50-75 mm Order No. 13117
measurement range 75-100 mm Order No. 13118
|
|
|
Precision Two Point Internal Micrometer Gauge Set
3-pieces
Measuring range 5 – 30 mm, 25 – 50 mm and 50 – 75 mm
Stainless, hardened and ground
With a locking screw and ratchet
Readout 0.01 mm
Scales matt-chromium
Measuring spindle 0.5 mm upwards
Carbide-tipped measuring surfaces
Order No. 13114 Buy Now or Check Price
|
|
|
Precision Parallel Block Gauge Set
87-pieces
stainless, hardened and lapped
Application: for checking test gages and test measurements, for setting length measuring equipment. For direct measurement and for setting precision indicators, gages, measuring equipment and tool machines. Made of tungsten reinforced steel especially heat treated. Each block gauge has its own particular place in the storage box.
| Individual Measurements mm |
Scale Divisions
|
| |
Quantity |
By mm |
| 1,001 - 1,009 |
9 |
0,001 |
1,01 - 1,49
|
49 |
0,01 |
0,5 - 9,5
|
19 |
0,5 |
10 - 100
|
10
|
10,0 |
Order No. 11345 Buy Now or Check Price
|
|
|
Universal Angle Block Set
9-pieces
0,5°, 1°, 2°, 3°, 4°, 5°, 10°, 15°, 30°
stainless, hardened and ground
Application: Used as an underlay in the vice or under the work pieces
Order No. 11340 Buy Now or Check Price
|
|
|
Precision Angle Prism Adjustable
32x25x75 mm
Stainless steel, hardened and ground With scale and nonius
Swivel range 0-60° and 0-30°
Application: used as an underlay in the vice or under the work pieces on different working levels.
Order No.11350 Buy Now or Check Price
|
|
|
Precision Prism Pair
No. 11305 44x41x35, clamping dia up to 30 mm
No. 11308 70x45x41, clamping dia up to 43 mm
2 pieces hardened prisms with clamping bracket
polished on all sides
Application: for clamping, outlining, controlling and drilling.
44x41x35 Order No. 11305 Buy Now or Check Price
70x45x41 Order No. 11308 Buy Now or Check Price
|
|
|
Precision Dial Test Indicator
Measuring gauge dia 30 mm
Measuring inset equipped with carbide ball Ø 2 mm
With dovetail guides for clamping shank
Clamping shank Ø 6 mm and Ø 8 mm incl.
Measuring span 0.8 mm
Scale 0 – 40 – 0
0.01 mm reading accuracy
Feeler length 12 mm
Order No. 13160 Buy Now or Check Price
|
|
|
Dial Gauge
measuring range 10 mm
clamping shank 8 mm h6
metal casing matt-chromium finish Ø 58 mm
in accordance with DIN 878
outer ring with 2 adjustable marks of tolerance
scale division 0,01 mm
Order No. 11334 Buy Now or Check Price
|
|
|
Digital Dial Gauge
Measurement range 10 mm
Clamping shank 8 mm h6
Metal casing matt-chromium finish Ø 58 mm
Accuracy 0,01 mm
Zero setting button
Reversible metric/inch
Large LCD display
Order No. 11336 Buy Now or Check Price
|
|
|
Precision Magnetic Measuring Support
Mechanical clamping
Measuring column Ø 12 mm x 181 mm
Cross arm Ø 10 mm x 150 mm
magnetic power 50 kg
Application: for measuring and presetting of tools and mounting device on machines
Order No. 11333 Buy Now or Check Price
|
|
|
Hydraulic Magnetic Measuring Support
Robust, stable design
The hinged rods are centrally clamped by a star handle
Location hole Ø 8 mm
Setting via fine adjustment
Total height approx. 370 mm
Operating range approx. 260 mm
Magnetic power 50 kg
Order No. 11332 Buy Now or Check Price
|
|
|
Precision Magnetic Measuring Support with Dial Gauge
Magnetic measuring support
Mechanical clamping
Measuring column Ø 12 mm x 181 mm
Cross arm Ø 10 mm x 150 mm
Magnetic power 50 kg
Dial Gauge:
Order No. 11335 Buy Now or Check Price
Measuring range 10 mm
Clamping shank 8 mm h6
Metal casing matt-chromium finish Ø 58 mm
In accordance with DIN 878
Outer ring with 2 adjustable marks of tolerance
Scale division 0,01 mm
|
|
|
Precision Magnetic Measuring Support with Dial Test Indicator
Magnetic measuring support
Mechanical clamping
Measuring column Ø 12 mm x 181 mm
Cross arm Ø 10 mm x 150 mm
magnetic power 50 kg
Precision Dial Test Indicator :
Measuring gage Ø 30 mm
Measuring inset equipped with carbide ball Ø 2 mm
With dovetail guides for clamping shank
Clamping shank Ø 6 mm and Ø 8 mm incl.
Measuring span 0.8 mm
Scale 0 – 40 – 0
0.01 mm reading accuracy
Feeler length 12 mm
Order-No. 13161 Buy Now or Check Price
|
|
|
Center Indicator With Measuring Dial Gauge
Measuring gauge Ø 40 mm
Head length 135 mm
Clamping shank Ø 10 mm
Resilient scriber
With outside and inside caliper
45 mm, 100 mm and 150 mm
Measuring gage 0 – 3 mm
0.01 mm reading accuracy
Shockproof
With stop rod for fixing the head
Application: for determining the centers of bores and shafts. For centering, scribing, zero point marking.
Order No. 11337 Buy Now or Check Price
|
|
|
Universal 3D Sensing Device
Feeler ball Ø 4 mm
Measuring gage Ø 50 mm
Total length: 163 mm
Clamping shank ø 20 mm
Accuracy 0.01 mm
Length without clamping shank 120 mm
Protected against splash water
Application: the 3D sensing device is a precise and versatile measuring instrument for milling and eroding machines (isolated probe). Used for precise positioning of the spindle axis at the edges of work pieces and devices. This allows quick and easy setting of work piece zero points as well as length measurements. The touching direction in X-, Y-, Z-axis is optional.
Order No. 13170 Buy Now or Check Price
|
|
|
Machine Level
200 mm
Supporting surfaces ground
With prismatic base
0,02 mm/m accuracy
With longitudinal and transverse water levels
Heat protection grip
Application: used to level up horizontal surfaces and arbors without time-consuming adjustments.
Order No. 11353 Buy Now or Check Price
|
|
|
Frame Level
200 mm
Supporting surfaces ground
2 prismatic sides - 1 flat side
0,02 mm/m accuracy
With longitudinal and transverse water levels
Heat protection grip
Application: used to level up horizontal surfaces and arbors without time-consuming adjustments.
Order No. 11354 Buy Now or Check Price
|
|
|
Edge Position Sensor
Clamping shank Ø 10 mm
Probe Ø 10 mm
Total length approx. 85 mm
Hardened and ground
Order No. 11330 Buy Now or Check Price
|
|
|
Edge Position Sensor Set
5-pieces
Clamping shank Ø 10 and 12 mm – total length 75 to 80 mm
Probe Ø 4, 10 and 12 mm and conical
Hardened and ground
Application for edge position sensor and set: used to touch, i.e. to find the position of the work piece surface or edge. The probe is joined to the clamping shank by means of a flexible spring, which enables a adjustment accuracy of 0,01 mm
Order No. 11331 Buy Now or Check Price
|
|
|
Electronical 2D Edge Finder with Display
LED display
Acoustic signal sound with work pieces made of metal
Hardened feeler ball made of steel HRC 90
Diameter of feeler ball 10 mm
Clamping shank Ø 20 mm
Total length approx. 100 mm
Application: used for approaching; i.e. position search of work piece reference surfaces and edges.
Order No. 13172 Buy Now or Check Price
|
|
|
Permanent Magnetic Chuck
250 x 125 x 60 mm
Nominal holding force 140 N/cm2
Application: for clamping very thin and small work pieces
Order No. 13280 Buy Now or Check Price
|
|
|
Permanent Magnetic Chuck Round
Ø 100 x 68 mm
Nominal holding force 80 N/cm2
Application: during lathing and grinding, for clamping thin work pieces.
Order No. 13285 Buy Now or Check Price
|
|
Supplied without measuring tools.
|
Measurement and Test Board
450x450x75mm
Black granite
Polished and lapped
Application: suitable for marking, measuring and adjusting.
Order No. 11395 Buy Now or Check Price
|