Wabeco Measuring Instruments

Precision measuring tool kit in plastic box, 5-pieces 1 caliper made of stainless steel 150 mm, 0,05 mm reading accuracy 1 micrometer 0-25 mm, 0,01 mm reading accuracy, measuring surfaces made of carbide and adjustment wrench 1 absolutely accurate square 100 mm arm length 1 ruler 150 mm

Order No. 11312

Precision slide caliper stainless, hardened and ground with a locking screw and depth gauge 0,02 mm reading accuracy
100 mm                                                                Order-No. 11314
150 mm                                                                Order-No. 11322
Precision dial slide caliper 150 mm stainless, hardened and ground with a locking screw and depth gauge 0,02 mm reading accuracy
Order-No. 11319
Precision electronic digital slide caliper stainless, hardened and ground with a locking screw and depth gauge 0,01 mm reading accuracy 5-digit LCD display with large display reversible metric/inch
0 – 100 mm                                                           Order-No. 11328
0 – 150 mm                                                           Order-No. 11320
0 – 200 mm                                                           Order-No. 11321
Precision electronic digital slide caliper 0 – 150 mm according IP 65 – water and oil resistant stainless, hardened and ground with a locking screw and depth gage 0,01 mm reading accuracy 5-digit LCD display with large display reversible metric/inch
Order-No. 11318
Universal graphometer 300 mm rail length stainless, hardened and ground with additional angle easy read off 4x90° measuring scale 360° readout 5 min 45° and 60° chamfered, reversible and slideable clamp for the adjustment of rail and angle
Order No. 11310
Straight edge 200 mm cross section 28 x 7 mm stainless hair measuring edge hardened and ground with isolation protection
Order No. 11311

	Precision micrometer screw 0 - 25 mm stainless, hardened, ground and lapped measurement surfaces with a locking lever and ratchet reading accuracy 0,01 mm in accordance with DIN 863 with carbide measurement surfaces isolating protection scales matt-chromium finished
	Order No. 11301
Precision micrometer set 4-pieces 0      -    25 mm 25     -    50 mm 50     -    75 mm 75     -    100 mm stainless, hardened, ground and lapped measurement surfaces with a locking lever and ratchet reading accuracy 0,01 mm in accordance with DIN 863 with carbide measurement surfaces isolating protection scales matt-chromium finished with ground and lapped check gage supplied in a wooden box
Order No. 11317
	Digital precision micrometer screws stainless, hardened, ground and lapped measurement surfaces with a locking lever and ratchet reading accuracy 0,01 mm in accordance with DIN 863 with carbide measurement surfaces isolating protection with ground and lapped check gages from 25 mm large LCD display multifunctional display reversible metric/inch
	0 – 25 mm                                             Order No. 11392
	25 – 50 mm                                           Order No. 11393
Holder for micrometer screws suitable for micrometer screws 0 – 100 mm Example of use
Order No. 11304

Square stainless, hardened and ground wedge-shaped knife edges on the length side

100 x 70 mm                                                            Order No. 13140

150 x 100 mm                                                          Order No. 13141

Try square set 4-pieces 70x50 mm, 95x60 mm, 120x80 mm, 175x100 mm  hardened and ground

Order No. 13130

Precision depth measuring caliper gage  200 mm stainless, hardened and ground with a locking screw reading accuracy 0,05 mm layer 100 mm
Order No. 11323

Precision digital depth measuring caliper gage 150 mm stainless, hardened and ground with a locking screw reading accuracy 0,01 mm rest 100 mm 5-digit LCD display with large display reversible metric/inch
Order No. 11327

	Precision two point internal micrometer gages set 3-pieces measuring range 5 – 30 mm, 25 – 50 mm and 50 – 75 mm stainless, hardened and ground with a locking screw and ratchet readout 0.01 mm scales matt-chromium measuring spindle 0.5 mm upwards carbide-tipped measuring surfaces
	Order No. 13114

Precision parallel block gage set 87-pieces stainless, hardened and lapped   Application: for checking test gages and test measurements, for setting length measuring equipment. For direct measurement and for setting precision indicators, gages, measuring equipment and tool machines. Made of tungsten reinforced steel especially heat treated. Each block gage has its own particular place in the storage box   Individual measurements mm              scale divisions                                                       quantity       by mm 1,001 - 1,009                                       9               0,001 1,01   - 1,49                                         49             0,01 0,5     - 9,5                                           19             0,5 10      - 100                                          10             10,0
Order No. 11345
Universal angle block set 9-pieces 0,5°, 1°, 2°, 3°, 4°, 5°, 10°, 15°, 30° stainless, hardened and ground   Application: used as an underlay in the vice or under the work pieces
Order No. 11340
Precision angle prism adjustable 32x25x75 mm stainless steel, hardened and ground with scale and nonius swivel range 0-60° and 0-30°   Application: used as an underlay in the vice or under the work pieces on different working levels	Example of use
		Order No. 11350

Dial gauge measuring range 10 mm clamping shank 8 mm h6 metal casing matt-chromium finish Ø 58 mm in accordance with DIN 878 outer ring with 2 adjustable marks of tolerance scale division 0,01 mm

Order No. 11334

Digital dial gage measurement range 10 mm clamping shank 8 mm h6 metal casing matt-chromium finish Æ 58 mm accuracy 0,01 mm zero setting button reversible metric/inch large LCD display

Order No. 11336

Precision magnetic measuring support mechanical clamping measuring column Æ 12 mm x 181 mm cross arm Æ 10 mm x 150 mm magnetic power 50 kg Application: for measuring and presetting of tools and mounting device on machines

Order No. 11333

Hydraulic magnetic measuring support robust, stable design the hinged rods are centrally clamped by a star handle location hole Æ8 mm setting via fine adjustment total height approx. 370 mm operating range approx. 260 mm magnetic power 50 kg

Order No. 11332

Precision magnetic measuring support with dial gage Magnetic measuring support mechanical clamping measuring column Æ 12 mm x 181 mm cross arm Æ 10 mm x 150 mm magnetic power 50 kg Dial gage measuring range 10 mm clamping shank 8 mm h6 metal casing matt-chromium finish Ø 58 mm in accordance with DIN 878 outer ring with 2 adjustable marks of tolerance scale division 0,01 mm
Order No. 11335

	Center indicator with measuring dial gage measuring gage Æ 40 mm head length 135 mm clamping shank Æ 10 mm resilient scriber with outside and inside caliper 45 mm, 100 mm and 150 mm measuring gage 0 – 3 mm  0.01 mm reading accuracy shockproof   with stop rod for fixing the head  Application: for determining the centers of bores and shafts. For centering, scribing, zero point marking.
	Order No. 11337
Universal 3D sensing device feeler ball Ø 4 mm measuring gage Ø 50 mm total length: 163 mm clamping shank ø 20 mm accuracy 0.01 mm length without clamping shank 120 mm protected against splash water Application: the 3D sensing device is a precise and versatile measuring instrument for milling and eroding machines (isolated probe). Used for precise positioning of the spindle axis at the edges of work pieces and devices. This allows quick and easy setting of work piece zero points as well as length measurements. The touching direction in X-, Y-, Z-axis is optional.
Order No. 13170
Machine level 200 mm supporting surfaces ground with prismatic base 0,02 mm/m accuracy with longitudinal and transverse water levels heat protection grip Application: used to level up horizontal surfaces and arbors without time-consuming adjustments
Order No. 11353
Frame level 200 mm supporting surfaces ground 2 prismatic sides - 1 flat side 0,02 mm/m accuracy with longitudinal and transverse water levels  heat protection grip Application: used to level up horizontal surfaces and arbors without time-consuming adjustments
Order No. 11354