… especially for CNC lathes CC-D6000 E high speed
§ robust, speed regulated motor, which can be adjusted by means of a potentiometer over a wide range of
cutting speeds. Power 2,0 kW, 230 V, 50 Hz
§ spindle speed 100 - 5000 r.p.m. (with lathe chuck Ø 125 mm max. 4800 r.p.m.)
§ suitable for small diameter tools due to high speed
§ tailstock with quick-release lever
with nccad basic software
|
with 3-jaw lathe chuck Æ 100 mm Order No. 1060055
|
|
with 3-jaw lathe chuck Æ 125 mm Order No. 1060056
|
|
with 4-jaw lathe chuck Æ 125 mm Order No. 1060057
|
with nccad professional software
|
with 3-jaw lathe chuck Æ 100 mm Order No. 1060070
|
|
with 3-jaw lathe chuck Æ 125 mm Order No. 1060071
|
|
with 4-jaw lathe chuck Æ 125 mm Order No. 1060072
|
… for all CC-D6000 E CNC lathes equipped with Camlock fixture
§ 5-year warranty
§ we guarantee ultimate precision due toproduction in Germanyon state-of-the-art machine tools
§ with hardened prismatic cast iron bed
§ tailstock with quick-release lever
§ made to toolmaker’s accuracy with test report
§ work spindle bore Ø 20 mm (optional Ø 30 mm for all CNC lathes CC-D6000 E)
§ Precision Camlock lathe chuck with turning and drilling jaws
Camlock spindle holder according to DIN 55029 size 4
for quick changing of lathe chucks and collet chucksby means of the quick-fastener
§ live lathe centre MT2
§ clockwise/anticlockwise rotation of work spindle
§ tumbler gear for left and right threads
§ conventional threading
change gear set for threading metric (0,4-4,0 mm) and inch (10-32 TPI) threads
2automatic longitudinal feed rates/lead screw drive
§ threading in CNC only with nccad software
§ constant torque throughout the entire speed range
n CNC lathe software and connection cable between PC and control system
n factory-installed control unit with integrated operational control and feed motor
n the CNC lathes can be used conventionally as well as with CNC
n the use of ball screws is essential for the highest possible positioning accuracy
n PC control
The PC assumes the administration of the program and the archiving of the data.
For program creating independent from the machine - with the aid of the lathe software, CNC programs can be produced on several PCs, independent of the CNC lathe. This means that new programs can be created on other PCs while the CNC lathe is performing machining operations on the work piece.
This increases the productivity of your CNC lathe.
n PCs are not included in our range of goods
… especially for CNC lathes CC-D6000 E high speed
§ robust, speed regulated motor, which can be adjusted by means of a potentiometer over a wide range of
cutting speeds. Power 2,0 kW, 230 V, 50 Hz
§ spindle speed 100 - 5000 r.p.m. (with lathe chuck Ø 125 mm max. 4800 r.p.m.)
§ suitable for small diameter tools due to high speed
with nccad basic software
|
with Camlock 3-jaw lathe cuck Æ 125 mm Order No. 1060066
|
|
with Camlock 4-jaw lathe cuck Æ 125 mm Order No. 1060067
|
with nccad pprofessional software
|
with Camlock 3-jaw lathe cuck Æ 125mm Order No. 1060076
|
|
with Camlock 4-jaw lathe cuck Æ 125mm Order No. 1060077
|