§ 5-year warranty
§ we guarantee ultimate precision due to production in Germany on state-of-art machinetools
§ with hardened prismatic cast iron bed
§ made to toolmaker’s accuracy with test report
§ work spindle bore Ø 20 mm (optional Ø 30 mm for all lathes D6000 E)
§ precision lathe chuck with turning and drilling jaw
§ live lathe centre MT2
§ clockwise/anticlockwise rotation of work spindle§ tumbler gear for left and right threads
§ change gear set for threadingmetric (0,4-4,0 mm) and inch (10-32 TPI) thread.
§ 2 automatic longitudinal feed rates/lead screw drive§ constant torque throughout the entire speed range
… especially for lathes D6000 E
§ with electronically infinitely variable drive30 - 2300 r.p.m.Equipped with a strong work spindle drive with dynamic, speed-controlled main drive motor, which can be adjusted by means of a potentiometer over a wide range of cutting speed
§ with single-phase inverse-speed motor 1,4 kW, 230 V, 50 Hz as a direct current model with continuous r.p.m. surveillance
§ tailstock with quick-release lever
§ also available in 110V - 60 Hz and inch model
… especially for lathes D6000 E high speed
§ robust, speed regulated motor, which can be adjusted by means of a potentiometer over a wide range ofcutting speeds. Power 2,0 kW, 230 V, 50 Hz
§ spindle speed 100 - 5000 r.p.m. (with lathe chuck Ø 125 mm max. 4800 r.p.m.)
§ suitable for small diameter tools due to high speed
|
with 3-jaw chuck dia 100 mm Buy Now or Check Price Order No. 10605
|
|
with 3-jaw chuck dia 125 mm Buy Now or Check Price Order No. 10606
|
| with 4-jaw chuck dia 125mm Order No: 10607 |
… for all D6000 E lathes equipped with Camlock fixture
§ 5-year warranty
§ we guarantee ultimate precision due to production in Germany on state-of-the-art machine tools
§ made to toolmaker’s accuracy with test report
§ tailstock with quick-release lever
§ with hardened prismatic cast iron bed
§ work spindle bore Ø 20 mm (optional Ø 30 mm for all CNC lathes CC-D6000 E)
§ Precision Camlock lathe chuck with turning and drilling jaws
Camlock spindle holder according to DIN 55029 size 4
for quick changing of lathe chucks and collet chucksby means of the quick-fastener
§ live lathe centre MT2
§ clockwise/anticlockwise rotation of work spindle
§ tumbler gear for left and right threads
§ change gear set for threading metric (0,4-4,0 mm) and inch (10-32 TPI) threads
§ 2 automatic longitudinal feed rates/lead screw drive
§ constant torque throughout the entire speed range
… especially for lathes D6000 E
§ with electronically infinitely variable drive30 - 2300 r.p.m. Equipped with a strong work spindle drive with dynamic, speed-controlled main drive motor, which can be adjusted by means of a potentiometer over a wide range of cutting speeds
§ with single-phase inverse-speed motor 1,4 kW, 230 V, 50 Hz as a direct current model with continuous r.p.m. surveillance
… especially for lathes D6000 E high speed
§ robust, speed regulated motor, which can be adjusted by means of a potentiometer over a wide range ofcutting speeds. Power 2,0 kW, 230 V, 50 Hz
§ spindle speed 100 - 5000 r.p.m. (with lathe chuck Ø 125 mm max. 4800 r.p.m.)
§ suitable for small diameter tools due to high speed
| |
Work spindle
bore dia 30 mm
no retrofitting
with ground inner taper MT3
|
|
|
Order No. 10678
|
|
Illustration D6000 E
with ball screws and
lead-or ball screw protective cover
|
Ball screws
n no retrofitting
n for both axes
n very high pitch and positioning precision
n wear-free
n incl. lead-or ball screw protective cover
|
|
|
Order No. 10645
|
|
Lead-or ball screw protective cover
n no retrofitting
n to protect the leading spindle and nut against swarf
n to prevent premature wear and loss of precision
|
|
|
Order No. 10680
|
|
Quick-action collet chuck
n no retrofitting
n quick clamping device for interchangeable collet chucks
n clamping range 1 – 30 mm
n to be used only up to max. 4000 r.p.m.
n clamping and unclamping of the work piece done by hand lever
n self-locking
n collets from 1 - 30 mm available – price upon request
|
|
|
Order No. 10930
|
|
Base cabinet
n H 85 x W 106 x D 45 cm
n with 2 lockable doors and 2 shelves
n made of powder-coated sheet steel
|
|
|
Order No. 10267
|
|
|
Levelling elements
n vibration pick up and absorption element
n Ø 80 mm, thread M10
n prevents the machine and cabinet moving
n for precise height adjustment on uneven ground
n 4 levelling elements are required per cabinet/machine
|
|
|
Order No. 10268
|
Coolant unit with splash guard
n for optional retrofitting
n for cooling and lubrication
n complete with feed pump 230 V, 50 Hz
n flexible hose with stop valve and nozzle
n content coolant: 19 litres
Application: i. e. when processing high alloy steel and aluminium,
improves the surface finish, increases tool endurance, prevents built-up edges, maintains dimensional accuracy of work pieces
|
| Buy Now or Check Price |
Order No. 10664
|