F1210E High Speed
Conventional Milling Machine
… for all milling machines
… especially for milling machines F1200 E high speed and F1210 high speed
5-year warranty
we guarantee ultimate precision due to production in Germany on state-of-the-art machine tools
made to toolmaker’s accuracy with test report
tool holder MT2 (optional MT3 or SK30)
protective hood prevents unintentional touching of the spindle while in operation. Swivels for quick tool change
adjustable play-free dovetail guides in all 3 axes
adjustable feed screws free of play in all 3 axes using adjustable bronze nut and counter nuts
milling head can be swivelled 90° to both sides
slow forward feed in Z-axis
drilling depth end stop
2 concertina covers to protect guides
exact clamping of the quill on the total surface area in the milling head
clean surface of milled work using individual guides which can be clamped
constant torque throughout the entire speed range
robust, speed-regulated motor, which can be adjusted by means of a potentiometer over a wide range of cutting speeds. Power 2,0 kW, 230 V, 50 Hz
spindle speed 100 - 7500 r.p.m.
suitable for small tools (e. g. for engraving) due to high speed
suitable for boring threads due to clockwise and anticlockwise rotation
|
Milling machine F1200 E high speed milling table 450 x 180 mm Order No. 11202
|
|
with automatic feed in all 3 axes Order No. 11203
and factory-installed control unit
|
|
Milling machine F1210 E high speed milling table 700 x 180 mm Order No. 11402
|
|
with automatic feed in all 3 axes Order No. 11403
and factory-installed control unit
|
|
Ball Screws
no retrofitting
for all 3 axes
very high pitch and positioning precision
down-cut milling and counter milling possible
wear-free for all milling machines with linear guides
with counterweight in Z-axis
|
|
|
for all F1210 E
|
Order No. 11445
|
|
Transverse extension for Y-axis
no retrofitting
maximal travel path 180 mm
|
|
| |
Order No. 11235
|
|
Tool holder MT3
no retrofitting
morse taper MT3 and tightening thread M12
|
|
| |
Order No. 11230
|
|
Tool holder SK30
no retrofitting
quick-release taper SK30 and tightening thread M12
|
|
| |
Order No. 11231
|
| Retrofit Setup for Automatic Feeds
* for optional retrofitting to each individual axis
* to be retrofitted by the customer
* for all individual axis
* control unit required for on/off switch, toggle switch for all 3 axes directions, potentiometer was well as electronic unit for controlling drive. This item is required no matter how many axis drives are being fitted. Any single drive can be fitted to suit each users needs. Individual axis can also be fitted by factory at time of order.
* pre-selectable feed direction, feed spindle infinitley variable from 0 - 800 mm/min
* clutch for engage/disengage each axis spindle
* overload clutch - when overloading or when colliding against the end position of the bed, an overload clutch comes into effect
* automatic feed and manual operation can be freely delected by individual clutch system
|
| Control Unit |
Order No.11279 |
Automatic feed X axis (lead screw and motor)
For F1200E |
Order No. 11276
|
| Automatic feed Y axis (lead screw and motor) |
Order No. 11277
|
| Automatic feed Z axis (lead screw and motor) |
Order No. 11278 |
|
Base Cabinet
For Wabeco Milling Machines
With lockable doors and two shelves.
Made of powder coated sheet steel.
H85 x W70 x D45 cm. |
 |
| Order No: 11267 |
Buy Now or Check Price |
|
Levelling element
For vibration pick up and absorption,
dia 80mm and thread M10, prevents machine cabinet moving.
Precise height adjust and four elements required for each machine stand
|
 |
| Order No: 10268 |
Buy Now or Check Price |
|
Coolant Unit
For cooling and lubrication
Complete with feed pump 230v, 50hz
Flexible hose with stop valve and nozzle
Content Coolant 13 litres
Application: i.e when processing high alloy syeel and aluminium, improves the surface finish, increase tool endurance, prevents built up edges, maintains dimensional accuracy of workpieces.
|
 |
| Order No: 11264 |
Buy Now or Check Price |
|
Coolant Return Plate
For Wabeco Milling Machines F1210 E and F 1410 LF
Is hooked into coolant unit
Th coolant is returned to coolant unit
|
 |
| Order No: 11265 |
Buy Now or Check Price |
|
Cover Rail for T-Slots 12mm wide slots
Pack unit: 3 pieces
Length pro cover 400 mm
Anodised aluminium
Prevents chips from getting into the T-slots
With holes for draining coolant
The cover rails are placed in the T-slots
Can be cut as necessary
|
 |
| Order No: 11259 |
Buy Now or Check Price |
|
Milling Start Set One
Consisting of:
Machine Vice 100 mm
Precision spring collet chuck with key
Collets dia 6mm - 10mm, 12mm, 16mm
Shell end mill set 20 pieces "TITAN" coated
|
 |
| Order No: 11999 |
Buy Now or Check Price |
|
Milling Start Set Two
Consisting of:
Machine Vice 100 mm
Precision clamping set 16-pieces
Clamping kit 58-pieces
Precision quick action drill chuck
Taper shaft for drill chuck
Shell end mill set 20-pieces "TITAN" coated
|
 |
|
Order No: 11998
|
|