… for all milling machines
n 5-year warranty
n we guarantee ultimate precision due toproduction in Germanyon state-of-the-art machine tools
n made to toolmaker’s accuracy with test report
n tool holder MT2 (optional MT3 or SK30)
n protective hood prevents unintentional touching of the spindle while in operation. Swivels for quick tool
change
n adjustable play-free dovetail guides in all 3 axes
n adjustable feed screws free of play in all 3 axes using adjustable bronze nut and counter nuts
n milling head can be swivelled 90° to both sides
n slow forward feed in Z-axis
n drilling depth end stop
n 2 concertina covers to protect guides
n exact clamping of the quill on the total surface area in the milling head
n clean surface of milled work using individual guides which can be clamped
n constant torque throughout the entire speed range
F1210 E
with 3-axis digital readout system,
base cabinet and coolant unit
… especially for milling machines F1200 E and F1210 E
n with electronically infinitely variable drive 140 - 3000 r.p.m. Equipped with a strong work spindle drive with dynamic, speed-controlled main drive motor, which can be adjusted by means of a potentiometer over a wide range of cutting speeds.
n with single-phase inverse-speed motor 1,4 kW, 230 V, 50 Hz as direct current model with continuous
r.p.m. surveillance
n also available 110V - 60 Hz and inch model
|
Milling machine F1200 E milling table 450 x 180 mm Order No. 11200
|
|
with automatic feed in all 3 axes Order No. 11201
and factory-installed control unit
|
|
Milling machine F1210 E milling table 700 x 180 mm Order No. 11400
|
|
with automatic feed in all 3 axes Order No. 11401
and factory-installed control unit
|
|
Ball Screws
n no retrofitting
n for all 3 axes
n very high pitch and positioning precision
n down-cut milling and counter milling possible
n for all milling machines with linear guides with counterweight in Z-axis
|
|
for all F1200 E
|
Order No. 11245
|
|
for all F1210 E
|
Order No. 11445
|
|
for all F1410 LF
|
Order No. 16445
|
|
Transverse extension for Y-axis
n no retrofitting
n maximal travel path 180 mm
n for all milling machines F1410 LF, the transverse Y-axis is standard
200 mm
|
|
|
Order No. 11235
|
|
Tool holder MT3
n no retrofitting
n morse taper MT3 and tightening thread M12
|
|
|
Order No. 11230
|
|
Tool holder SK30
n no retrofitting
n quick-release taper SK30 and tightening thread M12
|
|
|
Order No. 11231
|