Precision measuring tool kit n    in plastic box, 5-pieces n    1 caliper made of stainless steel 150 mm, 0,05 mm reading accuracy n    1 micrometer 0-25 mm, 0,01 mm reading accuracy, measuring surfaces made of carbide and adjustment wrench n    1 absolutely accurate square 100 mm arm length n    1 ruler 150 mm

Order No. 11312

 

Precision slide caliper n    stainless, hardened and ground n    with a locking screw and depth gage n    0,02 mm reading accuracy
100 mm                                                                Order-No. 11314
150 mm                                                                Order-No. 11322
Precision dial slide caliper n    150 mm n    stainless, hardened and ground n    with a locking screw and depth gage n    0,02 mm reading accuracy
Order-No. 11319
Precision electronic digital slide caliper n    stainless, hardened and ground n    with a locking screw and depth gage n    0,01 mm reading accuracy n    5-digit LCD display with large display n    reversible metric/inch
0 – 100 mm                                                           Order-No. 11328
0 – 150 mm                                                           Order-No. 11320
0 – 200 mm                                                           Order-No. 11321
Precision electronic digital slide caliper n    0 – 150 mm n    according IP 65 – water and oil resistant n    stainless, hardened and ground n    with a locking screw and depth gage n    0,01 mm reading accuracy n    5-digit LCD display with large display n    reversible metric/inch
Order-No. 11318
Universal graphometer n    300 mm rail length n    stainless, hardened and ground n    with additional angle n    easy read off 4x90° n    measuring scale 360° n    readout 5 min n    45° and 60° chamfered, reversible and slideable n    clamp for the adjustment of rail and angle
Order No. 11310
Straight edge n    200 mm n    cross section 28 x 7 mm n    stainless n    hair measuring edge hardened and ground n    with isolation protection
Order No. 11311

	Precision micrometer screw n    0 - 25 mm n    stainless, hardened, ground and lapped measurement surfaces n    with a locking lever and ratchet n    reading accuracy 0,01 mm n    in accordance with DIN 863 n    with carbide measurement surfaces n    isolating protection n    scales matt-chromium finished
	Order No. 11301
Precision micrometer set n    4-pieces 0      -    25 mm 25     -    50 mm 50     -    75 mm 75     -    100 mm n    stainless, hardened, ground and lapped measurement surfaces n    with a locking lever and ratchet n    reading accuracy 0,01 mm n    in accordance with DIN 863 n    with carbide measurement surfaces n    isolating protection n    scales matt-chromium finished n    with ground and lapped check gage n    supplied in a wooden box
Order No. 11317
	Digital precision micrometer screws n    stainless, hardened, ground and lapped measurement surfaces n    with a locking lever and ratchet n    reading accuracy 0,01 mm n    in accordance with DIN 863 n    with carbide measurement surfaces n    isolating protection n    with ground and lapped check gages from 25 mm n    large LCD display n    multifunctional display n    reversible metric/inch
	0 – 25 mm                                             Order No. 11392
	25 – 50 mm                                           Order No. 11393
Holder for micrometer screws n    suitable for micrometer screws 0 – 100 mm Example of use
Order No. 11304

 

Square n    stainless, hardened and ground n    wedge-shaped knife edges on the length side

100 x 70 mm                                                            Order No. 13140

150 x 100 mm                                                          Order No. 13141

Try square set n    4-pieces 70x50 mm, 95x60 mm, 120x80 mm, 175x100 mm n    hardened and ground

Order No. 13130

Precision depth measuring caliper gage n    200 mm n    stainless, hardened and ground n    with a locking screw n    reading accuracy 0,05 mm n    layer 100 mm
Order No. 11323

Precision digital depth measuring caliper gage n    150 mm n    stainless, hardened and ground n    with a locking screw n    reading accuracy 0,01 mm n    rest 100 mm n    5-digit LCD display with large display n    reversible metric/inch
Order No. 11327

	Precision two point internal micrometer gages set n    3-pieces n    measuring range 5 – 30 mm, 25 – 50 mm and 50 – 75 mm n    stainless, hardened and ground n    with a locking screw and ratchet n    readout 0.01 mm n    scales matt-chromium n    measuring spindle 0.5 mm upwards n    carbide-tipped measuring surfaces
	Order No. 13114

Precision parallel block gage set n    87-pieces n    stainless, hardened and lapped   Application: for checking test gages and test measurements, for setting length measuring equipment. For direct measurement and for setting precision indicators, gages, measuring equipment and tool machines. Made of tungsten reinforced steel especially heat treated. Each block gage has its own particular place in the storage box   Individual measurements mm              scale divisions                                                       quantity       by mm 1,001 - 1,009                                       9               0,001 1,01   - 1,49                                         49             0,01 0,5     - 9,5                                           19             0,5 10      - 100                                          10             10,0
Order No. 11345
Universal angle block set n    9-pieces 0,5°, 1°, 2°, 3°, 4°, 5°, 10°, 15°, 30° n    stainless, hardened and ground   Application: used as an underlay in the vice or under the work pieces
Order No. 11340
Precision angle prism adjustable n    32x25x75 mm n    stainless steel, hardened and ground n    with scale and nonius n    swivel range 0-60° and 0-30°   Application: used as an underlay in the vice or under the work pieces on different working levels