Universal drilling and milling unit DF1680 E
suitable for WABECO lathes D6000 E/D6000 E high speed
 |
High torque on the work spindle even in the lower speed ranges and this is ideal for machining materials which are hard and difficult to cut.
Extremely silent running by means of modern, electronically regulated drive technology.
Extremely rigid work spindle in extendable sleeve -the precision ground work spindle with an accuracy of 0,01 mm and is mounted in a generously dimensioned drilling and milling quill with anti-friction bearings.
The milling head can be swivelled 90º to both sides for drilling and milling at every angle. The vertical position can be set by means of a hardened and ground conical index pin.
Tool, clamping and ejection system for mounting and ejecting tools (milling cutter, drill, chuck etc.) without a lot of effort. This makes any knocking out of tools with a hammer causing damage to the spindle bed, unnecessary.
The ON-OFF switch with a low voltage release, i.e. the machine does not restart automatically in the case of a power failure. The drive electronics are equipped with a multiple fault monitoring circuit which allows a smooth start under all operating conditions.
Easy maintenance - because all the modules are easy to reach. The modules can easily be removed for repair purposes.
|
 |
|
Longitudinal X-axis
|
500 mm
|
|
Vertical Z-axis
|
280 mm
|
|
Transverse Y-axis
|
140 mm
|
|
Power 230 V, 50 Hz
|
1,4 kW
|
|
Spindle speed indefinitely variable
|
140 - 3000 r.p.m.
|
|
Swivel range of the milling head to both sides
|
90°
|
|
Tool holder
|
MT2 and tightening thread M10
|
|
Drilling stroke
|
55 mm
|
|
Work bench (L x W)
|
270 x 150 mm
|
|
Number of T-slots
|
2
|
|
Width of T-slots
|
10 mm
|
|
Distance between milling machine table
and work spindle
|
min. 0 mm
max. 280 mm
|
|
Working range milling spindle nose-support
|
185 mm
|
|
Weight without packing
|
49 kg
|
|
n 5-year warranty
n we guarantee ultimate precision due to production in Germany on state-of-the-art machine tools
n made to toolmaker’s accuracy with test report
n with electronically infinitely variable drive 140 - 3000 r.p.m. Equipped with a strong work spindle drive with
dynamic, speed-controlled main drive motor, which can be adjusted by means of a potentiometer over a wide range of cutting speeds
n with single-phase inverse-speed motor 1,4 kW, 230 V, 50 Hz as direct current model with continuous
r.p.m. spindle feedback
n tool holder MT2
n protective hood prevents unintentional touching of the spindle while in operation. Swivels for quick tool change
n adjustable play-free dovetail guides in the Z-axis
n adjustable feed screws free of play using adjustable bronze nut and counter nuts in the Z-axis
n milling head can be swivelled 90° to both sides
n slow forward feed
n drilling depth end stop
n 1 concertina cover to protect guides
n exact clamping of the quill on the total surface area in the milling head
n constant torque throughout the entire speed range
D Options
Universal cross tables
n for optional retrofitting
n made to toolmaker’s accuracy with test report
n all parts of the cross table manufactured from high-quality grey cast iron
n adjustable play free dovetail guides
n milled graduations on the scale rings of the cross table
n using this precise and stable cross table, the universal drilling and milling unit can be retooled as a pillar milling machine with dovetail guide
|
work bench (L x W) 450 x 180 mm weight 35 kg Order No. 11220
|
|
work bench (L x W) 700 x 180 mm weight 46 kg Order No. 11420
|