Wabeco Milling Machines
Wabeco Milling Machines
You want to mill with precision!
|You want a robust milling machine!
By means of the powerful and infinitely variable drive, it is possible, for example, to mill material made of steel to a depth of 10 mm using a 10 mm shell end-mill. The machine column and cross table remain rigid during such cutting operations. We would be pleased to proof it to you.
You want precise control!
You can choose bet ween play-free adjustable dovetail guides or permanently play-free linear guides.
|You want precise spindles!
You can choose between trapezoid thread spindles with adjustable bronze nut and counter nuts or non-wearing ball bearing spindle.
You want generations of use!
This is guaranteed by in-house design and construction. The supply of replacement parts is also guaranteed for decades.
|You want expert advice!
If you have technical queries or you wish to be specially advised in selecting the most suitable milling machine and the corresponding accessories for your requirements, our
WABECO team is at your disposal for advice.
You want safety!
The milling machines’ electrical systems have been constructed in accordance with VDE (Association of German electrical technicians’ regulations).
You want a warranty!
We offer you a 5-year warranty - the warranty does not cover parts subject to wear.
|Construction - the machine column and cross table are
produced from annealed high-quality ribbed grey cast iron. The spindle milling carriage with vertical milling spindle is guided along a vertical column.
The advantage of this type of construction is that there is
good absorption of the cutting force and the weight of the
workpiece. The height of the work piece remains constant, making both work piece and chucking fixture easy to handle.
|High torque on the work spindle allows working without
problems even in the lower speed ranges for example when machining materials which are hard and difficult to
A wide toothed belt between the motor and the work spindle provides for slip-free drive.
Extremely silent running by means of modern electronically regulated drive technology.
Large dimension work spindle drive in extendable
quill - The work spindle is precision ground with an exactness of 0,01 mm and mounted in a generously dimensioned drilling and milling quill with adjustable anti-friction bearings.
|Universal milling head adjustment - the milling head can
be rotated 90° in both directions. This allows milling and
drilling operations at any angle. The angle position can be
easily read off the large scale. The vertical position can be set by means of a conical index pin.
Functional tool clamping - the work spindle is equipped
with a new tool clamping and ejection system. This system makes it possible to mount tools (milling cutter, drills, chucks, etc) in the tool spindle and eject them again with little force even after many years. This makes any knocking out of tools with a hammer causing damage to the spindle bed, unnecessary.
|Exact reading - due to milled graduatins on the scale rings.
Electronic equipment - The ON-OFF switch is equipped
with a low voltage release, i.e. the milling machine does not restart automatically in the event of a power failure. The drive electronics are equipped with a multiple fault monitoring circuit which allows a smooth start under all operating conditions.
Easy maintenance - WABECO milling machines are easy
to maintain because all the modules are easy to reach. The modules can easily be removed for repair purposes.